Skip to content
Call us for a Free Quote: (416) 966-4200 Free Quote

White Haze on Pavers: How to Fix Efflorescence

November 10, 2026
epoxy garage floor

Ask a Question

Send us a note and we'll get back to you — usually within one business day.

What’s it about?

Where you are, rough size, and what state it’s in — that’s usually enough to answer without coming out.

We’ll only use your details to answer this — no lists, no marketing.

Efflorescence is the chalky white haze that forms on pavers when water moves through the stone and carries natural mineral salts to the surface, then evaporates and leaves the salts behind. The fix is to remove the salts with the right cleaning, dry the surface completely, and only then seal so moisture can no longer travel through the stone. Skip the sealing step, or seal too soon, and the haze usually returns after the next rainfall or spring thaw.

Around the GTA, that cycle plays out every year: snow melt and spring rain soak the ground, road salt adds more minerals, and freeze-thaw movement keeps water moving through the pavers.

What Is Efflorescence and Why Does It Appear on Pavers?

Efflorescence is not mould, and it is not your sealer peeling. It is a deposit of mineral salts — the same kind of salts naturally present in concrete pavers, mortar or the sand and gravel underneath them. Water is the delivery system: moisture soaks into the stone, dissolves a little of that material, and carries the dissolved salts up to the surface. When the water evaporates, the salts stay behind as a powdery white film, a light grey haze or tiny crystals.

It is most common on new pavers, which can shed salts for the first season or two as the concrete cures, but it also appears on older surfaces. You will often notice it in shaded or damp spots, along low edges, or wherever water evaporates fastest, because those are the places where salts keep getting deposited.

How to Remove the White Haze Safely

Start gently, then move up only as far as the surface needs. Dry-brush the area first to lift loose powder before any water is involved, then wash the pavers and let them dry. A lot of light efflorescence simply rinses away and does not come back. For stubborn haze, the next step is a cleaner formulated for efflorescence on your paver type — these are typically mild acid-based products that dissolve the salts, and they must be rinsed off completely.

One caution: not every paver tolerates every cleaner. A product that works on concrete pavers can etch or discolour natural stone, so test a small, hidden area first and follow the label exactly. The same goes for pressure: a controlled power wash helps lift the salts, but too much pressure can scar the paver face or blast sand out of the joints. When in doubt, ask us whether a particular cleaner or method suits your surface.

Work in this order:

  • Dry-brush the pavers to remove loose powder before adding water.
  • Wash the surface and let it dry fully to see what is actually left.
  • Use an efflorescence-specific cleaner only if the haze remains, testing a hidden spot first.
  • Rinse thoroughly so no cleaner residue stays behind.
  • Wait until the surface is completely dry before judging the result — efflorescence can disappear while wet and reappear as it dries.

Why Efflorescence Keeps Coming Back in the GTA

If you clean the haze but do not change the conditions that created it, expect it to return. Southern Ontario gives efflorescence everything it needs. Freeze-thaw cycles are the big one: water soaks into the pavers, freezes and expands, and every thaw lets moisture and salts move toward the surface again. Road salt makes it worse — de-icing salt tracked onto driveways and walkways in winter dissolves into the same water and leaves its own white deposits behind.

Spring is the worst season for a reason. Snow melt and weeks of spring rain keep the ground wet, while clay soil — common across Scarborough, Toronto, North York, Markham and Vaughan — drains slowly, so water sits under the pavers and wicks upward. In summer, strong UV does not cause efflorescence, but it dries wet pavers quickly after rain or sprinkler use, which makes the white haze appear almost overnight.

Preventing Efflorescence Before It Returns

Prevention comes down to two things: controlling the water and sealing only when the surface is truly clean and dry. Check the drainage first. The paved area should slope gently away from the house, and downspouts should not pour water across the pavers. Where water pools, it feeds the same salt-and-moisture cycle over and over.

Re-sanding the joints matters too. Loose or washed-out joints let water sit beneath the stones, so fresh joint sand helps keep the base drier. Before any sealer goes on, the pavers and joints both need to dry completely — sealing over damp stone traps moisture, and the trapped moisture often shows up later as a milky haze. Read our guide on how to prep interlock for sealing for the full preparation checklist.

Finally, a quality sealer is the last line of defence: once the salts are removed and the surface is dry, sealing reduces how much water can soak into the stone, so there is less moisture available to carry salts to the surface. That is why our interlock cleaning, re-sanding and sealing service handles all three steps in order rather than sealing over a problem that is still active.

With brand-new pavers, a little patience helps: they may shed salts a few times before the material settles down, and cleaning them each time without sealing prematurely usually stops the cycle faster.

Frequently Asked Questions

Is efflorescence harmful or a sign my pavers are damaged?

It is a cosmetic deposit, not structural damage, and it does not weaken the pavers. It is a sign that water is moving through the stone, so the useful response is to find the moisture source, clean the salts and seal once dry.

Can I just power wash the white haze off?

A controlled wash removes loose surface powder, but stubborn efflorescence usually needs a cleaner made for the job. Too much pressure can etch the paver or blow out joint sand, so the pressure and method need to match the stone.

How long should pavers dry before sealing?

There is no single number of days; it depends on the weather and how the surface drains. The pavers and the joints need to be dry through and through, not just dry on top. In the GTA, that usually means a stretch of dry, mild days — never right after rain.

Why did the haze come back after I sealed?

Usually because salts were not fully removed first, or the sealer went over damp stone and trapped moisture underneath. Water entering from below through poor drainage or missing joint sand can also keep pushing salts up through the surface.

Seal Tech Inc. serves Scarborough, Toronto, North York, Markham, Vaughan and the rest of the Greater Toronto Area. Call (416) 966-4200 for a free written quote, or contact us to send photos of your pavers with your quote request.

HomeStars Best of 2023, 2024, 2025

We were named Best Concrete Contractor 3 years in a row by HomeStars

Get a free quote

Serving Scarborough and the Greater Toronto Area. Tell us what needs doing.

Or call (416) 966-4200

No obligation. We never share your details.

Thanks — your request is in. We'll be in touch shortly.

Something went wrong. Please call (416) 966-4200 instead.

Ready to make your surfaces look new again?

Free, no-obligation quotes across the GTA — usually within one business day.