Skip to content
Call us for a Free Quote: (416) 966-4200 Free Quote

Green Algae on Interlock: Causes and Cures

November 10, 2026
power wash company downtown oakville

Ask a Question

Send us a note and we'll get back to you — usually within one business day.

What’s it about?

Where you are, rough size, and what state it’s in — that’s usually enough to answer without coming out.

We’ll only use your details to answer this — no lists, no marketing.

Green algae on interlock is almost always a moisture and shade problem, not a sign that your pavers are ruined. Algae grows where stone stays damp and out of direct sun, so it usually starts in shaded joints, under trees, or in low spots that hold water. The good news is that it can be cleaned off, and with better drainage, fresh joint sand and a quality sealer, it usually stays gone.

Why green algae shows up on interlock

Algae is a simple, plant-like organism that thrives where there is moisture, a little organic matter and not too much direct sun. Interlock gives it exactly those conditions. The joints between pavers trap fine soil, leaf bits and water, and those shaded, damp grooves are where algae colonizes first before spreading onto the paver faces.

Around a GTA home, the usual triggers are:

  • Shade from the house, a fence or large trees, especially on north-facing walkways.
  • Downspouts or splash blocks that dump water onto the walkway or patio.
  • Sprinklers that hit the same corner every morning.
  • Low spots where rainwater pools instead of running off.
  • Slow-draining soil, including the clay soil common in Scarborough and across the GTA.

How GTA weather and soil make it worse

Southern Ontario’s seasons line up almost perfectly for algae. Spring rain and melting snow keep the ground saturated for weeks, and clay soil drains slowly, so water lingers under and around the pavers. Add a stretch of cool, damp spring weather and the shaded side of a walkway can stay wet for days at a time.

Freeze-thaw cycles play a part too. Water that seeps into the joints freezes and expands in winter, then thaws in spring. Over several seasons this opens the joints wider and washes sand out of them, leaving more room for debris and trapped moisture.

Road salt doesn’t help. Salt draws and holds moisture in the joints, and the gritty residue it leaves behind catches leaves and dirt. In summer, sunny areas bake dry within hours, but damp, shaded corners stay wet — which is why algae often looks worse after a hot spell even though direct sun actually discourages it.

How to remove green algae safely

Light algae usually comes off with a brush and a mild cleaner. Go gently, because aggressive scrubbing or too much pressure can scar the paver face and strip the joint sand that holds everything together.

  • Start by sweeping or blowing leaves, dirt and maple keys out of the joints.
  • Wet the area, then scrub with a stiff nylon or brass brush. Avoid steel wire brushes, which can scratch the stone.
  • For light growth, warm water with a few drops of dish soap is often enough. For heavier staining, an oxygen-based cleaner is gentler on pavers and nearby plants than chlorine bleach.
  • Rinse thoroughly and let everything dry completely before re-sanding or sealing.
  • If you use a pressure washer, keep a wide fan tip at a safe distance. High pressure can etch the stone and blast sand out of the joints.

For a large driveway, tight corners or growth that keeps returning, professional interlock cleaning is usually the practical choice. Seal Tech cleans, re-sands and seals interlock driveways, walkways and patios across Scarborough, Toronto, Markham, Vaughan and the rest of the GTA — and we guarantee our work. If you’re weighing a chemical algae treatment, ask us whether it suits your surface.

How to keep it from coming back

Algae returns for the same reasons it arrived, so prevention is mostly about removing moisture and debris.

  • Fix the water first. Extend downspouts away from the walkway, redirect sprinklers and level low spots so water runs off instead of pooling.
  • Sweep regularly. Leaves, soil and seed pods that sit in the joints are food for algae.
  • Re-sand the joints. Fresh joint sand fills the gaps so water and debris have fewer places to sit.
  • Seal the surface. A good sealer helps shed water, brings back the colour and makes routine cleaning easier.
  • Go easy on de-icers in winter. Some melters hold moisture in the joints, so shovel first and use grit or pet-safe products sparingly.

Late spring through early fall is the practical window for sealing in the GTA — the surface needs to be dry, and the sealer needs warm enough weather to cure before the first frost. Once the surface is sealed, day-to-day care keeps it looking that way. See our guide on how to maintain a sealed driveway for a simple routine.

Frequently Asked Questions

Is green algae the same as moss or mould?

Not quite. Algae is a thin, often slippery green film. Moss is thicker, spongy and grows upright, while mould tends to be fuzzy and darker. All three turn up in damp, shaded spots, but they’re cleaned differently, so it helps to know which one you have.

Will a pressure washer remove algae for good?

It removes the visible growth, not the cause. If the area still stays damp and the joints still hold debris, the algae will come back. Cleaning is the first step; drainage, re-sanding and sealing are what make the result last.

Is algae harmful to my interlock or my family?

Algae doesn’t structurally damage pavers, but it is unsightly and can turn slippery when wet, which is a real fall hazard on stairs and walkways. Because it also traps moisture against the stone over time, it’s worth cleaning off sooner rather than later.

Does sealing really stop algae?

Sealing helps a great deal because it sheds water and stabilizes the joints, but no sealer can completely overcome a permanently shaded, constantly wet corner. Most homeowners find that sealing turns a yearly algae problem into an occasional rinse-and-sweep job.

Green algae is a fixable problem, not a reason to replace your interlock. Seal Tech Inc. serves Scarborough and the GTA — call (416) 966-4200 for a free written quote, or send photos through our contact page and Ryan will call you back.

HomeStars Best of 2023, 2024, 2025

We were named Best Concrete Contractor 3 years in a row by HomeStars

Get a free quote

Serving Scarborough and the Greater Toronto Area. Tell us what needs doing.

Or call (416) 966-4200

No obligation. We never share your details.

Thanks — your request is in. We'll be in touch shortly.

Something went wrong. Please call (416) 966-4200 instead.

Ready to make your surfaces look new again?

Free, no-obligation quotes across the GTA — usually within one business day.